The stop count sets the shutter speed, not the quality
Both the NiSi 100x100mm Nano IR ND8 and ND1000 are square filters in the NiSi 100mm system, made from high-quality optical glass with nano coating and an infrared protection layer. The real decision is how much light you want to remove: 3 stops or 10 stops. That difference changes your shutter speed by a factor of 128, which is why these two filters suit different scenes.
Use the ND8 when you still want a recognizable exposure in changing light. Use the ND1000 when you need to push exposures into minutes, typically in bright daylight outside golden hour.
ND8 (3-stop) vs ND1000 (10-stop): what changes in practice
- Light reduction: ND8 removes 3 stops; ND1000 removes 10 stops. The ND1000 is roughly 128x darker, so it demands much slower shutter speeds or wider apertures to compensate.
- Typical scenes: ND8: flowing waterfalls, dreamy seascapes, and high-contrast scenes where you want motion blur without losing all ambient light. ND1000: bright daylight long exposures, especially outside golden hour when ambient light is strong.
- Exposure flexibility: The 3-stop ND8 leaves more room to adjust shutter speed and aperture without hitting very long exposures. The 10-stop ND1000 pushes you toward multi-minute exposures, which can be an advantage for smoothing water or clouds but requires more planning.
- Infrared protection: Both filters include an infrared protection coating to prevent red color cast when shooting at small apertures. This is a shared feature, not a differentiator.
When the ND8’s 3 stops are the better fit
The ND8 is the more forgiving choice when light is moderate or changing. Its 3-stop reduction lets you use slower shutter speeds for motion blur in waterfalls and seascapes while keeping the scene bright enough to compose and focus easily. It also helps in high-contrast scenes where highlights and shadows are hard to balance, without forcing extremely long exposures that can introduce noise or require extra timing tools.
If you shoot handheld or in mixed light, the ND8’s lower density means you can still get a usable shutter speed without a tripod for every shot. It’s also a good entry point into square filters because it’s less likely to overwhelm you with black frames while you learn to calculate exposure.
When the ND1000’s 10 stops earn their place
The ND1000 is built for bright conditions. As the product record notes, it is used during the day outside of golden hour, when ambient light is strong enough that a 3-stop filter wouldn’t slow your shutter enough for dramatic motion blur. With the ND1000 you can extend exposures for up to 5 minutes during golden hour with appropriate settings, and in full daylight you can achieve similarly long effects.
That makes it the tool for turning moving water into glass, erasing crowds from a scene, or capturing cloud streaks in the middle of the day. The tradeoff is that you’ll almost always need a tripod, and you’ll need to calculate exposure carefully because the viewfinder will be very dark.
The two filters side by side
- NiSi 100x100mm Nano IR Neutral Density filter – ND1000 (3.0) – 10 Stop: NiSi 100x100mm Nano IR Neutral Density filter – ND1000 (3.0) – 10 Stop: provides a 10-stop light reduction, true-to-life color, no color cast, and is compatible with the NiSi 100mm system. Confirms the 10-stop density and system compatibility, which are the core reasons to choose this filter for bright-light long exposures.

NiSi 100x100mm Nano IR Neutral Density filter – ND1000 (3.0) – 10 Stop - NiSi 100x100mm Nano IR Neutral Density filter – ND8 (0.9) – 3 Stop: NiSi 100x100mm Nano IR Neutral Density filter – ND8 (0.9) – 3 Stop: reduces light by 3 stops, crafted from high-quality optical glass with nano coating, and eliminates unwanted red color cast via infrared protection. Shows the 3-stop density and shared IR protection, so you can compare on light loss alone rather than color quality.

NiSi 100x100mm Nano IR Neutral Density filter – ND8 (0.9) – 3 Stop
Shared strengths: why both are Nano IR filters
Both filters use high-quality optical glass rather than resin, and both have a nano coating on both sides that repels water and oil. That coating helps prevent loss of detail and makes cleaning easier in the field. Both also include an infrared protection layer to eliminate the red color cast that can occur when shooting at small apertures—a common problem with dense ND filters.
Because these qualities are common to both, your decision should hinge on stop count and the shooting conditions you face most often, not on image quality differences between the two.
Compatibility and handling for both filters
Both are 100x100mm square filters designed for the NiSi 100mm filter system, which suits cameras with lenses that have a standard filter thread from 49mm to 95mm. You’ll need the appropriate holder and adapter ring for your lens, but those are system components rather than filter-specific requirements.
Neither filter includes a holder or adapter ring in the supplied information, so factor those into your budget if you’re new to the system. The square format allows you to use graduated ND filters alongside these solid NDs, which is a key advantage over screw-in filters.
What the supplied information does not settle
The product records do not include exposure charts, recommended shutter speed calculations, or specific step-by-step instructions for using these filters. They also do not state whether either filter is compatible with third-party 100mm holders. If you need precise guidance on exposure compensation or holder compatibility, check the manufacturer’s documentation or test the filter with your own setup before relying on it for a critical shoot.



