The holder is lens-specific, so start with your lens
The NiSi 180mm system is not a one-holder-fits-all setup. Each holder is built around a particular ultra-wide lens, and adapters extend that holder to other lenses only where NiSi has confirmed the fit. For the three products here, the decision starts with which lens you are mounting: the Irix 11mm f/4 has its own dedicated holder, while the Sigma 12-24mm f/4 HSM Art and any lens with an 82mm filter thread use the NiSi 180mm Filter Holder for Canon 11-24mm as their base. That Canon holder is not included with either adapter.
NiSi 180mm Filter Holder for Irix 11mm f/4
- NiSi 180mm Filter Holder For Irix 11mm f/4: Custom designed for the Irix 11mm f/4 and holds 2 180mm filters at the same time. If the Irix 11mm f/4 is your ultra-wide, this is the holder made for it; no adapter ring is needed to mount it.

NiSi 180mm Filter Holder For Irix 11mm f/4 - NiSi 180mm Filter Holder For Irix 11mm f/4: 360-degree rotating with slight vignetting, and compatible with 180mm square filters of 2mm thickness. The rotation helps align graduated filters, while the stated slight vignetting is a trade-off to expect at this focal length.
- NiSi 180mm Filter Holder For Irix 11mm f/4: Made from aviation-grade aluminum with a CNC-machined single element and matte black frosted finish. The construction and anti-reflective finish are part of the handling and stray-light control you are paying for.
Sigma 12-24mm Art: an adapter, not a holder
The NiSi Sigma 12-24mm f/4 HSM Art Series Adapter does not replace the Canon 11-24mm holder; it must be used with it. The adapter is CNC machined from a single block of aviation-grade aluminum with a matte black frosted finish and a gasket to prevent light leaking. NiSi states it allows the 180mm system on the Sigma 12-24mm f/4 HSM Art with no vignetting in a full 360-degree rotation, even at 12mm. If you do not already own the Canon 11-24mm holder, budget for it separately.
Sigma 12-24mm Art adapter: what it depends on
- NiSi Sigma 12-24mm f/4 HSM ART Series Adapter for NiSi 180mm Filter Holder: Must be used with the NiSi 180mm Filter Holder for Canon 11-24mm to mount the 180mm system on the Sigma 12-24mm f/4 HSM Art. The adapter alone will not mount to the Sigma lens; the Canon holder is the required base.

NiSi Sigma 12-24mm f/4 HSM ART Series Adapter for NiSi 180mm Filter Holder - NiSi Sigma 12-24mm f/4 HSM ART Series Adapter for NiSi 180mm Filter Holder: The Canon 11-24mm holder is sold separately and not included. This is the hidden cost in the Sigma path, so check your kit before ordering.
- NiSi Sigma 12-24mm f/4 HSM ART Series Adapter for NiSi 180mm Filter Holder: No vignetting in a full 360-degree rotation at 12mm, with a gasket to prevent light leaking. That is the specific performance claim for this pairing, and the gasket matters when shooting toward bright light.
82mm-thread lenses: the Canon holder plus an adapter ring
The NiSi 82mm Filter Adapter Ring is a male-thread aluminum ring designed to let the Canon 11-24mm holder work on lenses with a standard 82mm filter thread. It is compatible with any lens with a standard 82mm filter thread, but the Canon 11-24mm holder is required. This is the broadest path of the three because it is not tied to one lens model, but it also depends on that same separate holder. The supplied information does not confirm vignetting behavior for every 82mm lens, so treat the Canon 11-24mm pairing as the known reference and test your own lens before a critical shoot.
82mm adapter ring: fit and dependency
- NiSi 82mm Filter Adapter Ring for Nisi 180mm Filter Holder (Canon 11-24mm): Male 82mm filter thread, made from aluminum, designed for use with the NiSi 180mm filter holder for Canon 11-24mm. It is the thread-to-holder bridge for 82mm lenses, not a standalone holder.
- NiSi 82mm Filter Adapter Ring for Nisi 180mm Filter Holder (Canon 11-24mm): Compatible with any lens with a standard 82mm filter thread, and the Canon 11-24mm holder is required. This is the widest compatibility claim in the group, but it only works if you have the Canon holder.
Which path fits your kit
The three products solve different problems, and the right one depends on the lens you already own and whether you have the Canon 11-24mm holder.
- Irix 11mm f/4: Choose the dedicated NiSi 180mm Filter Holder for Irix 11mm f/4. It is custom designed for that lens, holds two 180mm filters, rotates 360 degrees, and has slight vignetting. No adapter ring is needed for this lens.
- Sigma 12-24mm f/4 HSM Art: Choose the Sigma adapter only if you already own or will buy the Canon 11-24mm holder. The adapter is required to use that holder on the Sigma, and NiSi claims no vignetting in full rotation at 12mm.
- Any lens with an 82mm filter thread: Choose the 82mm adapter ring plus the Canon 11-24mm holder. It is the most flexible option, but the holder is sold separately and vignetting is not confirmed for every lens.
Clearance pricing and what to confirm before you order
All three items are listed in the Clearance Sale category, with catalog prices of USD 286.09 for the Irix holder (comparison USD 469.00), USD 69.76 for the Sigma adapter (comparison USD 109.00), and USD 62.30 for the 82mm adapter ring (comparison USD 89.00). Those prices are catalog figures, not a promise of current stock. Before ordering, confirm three things: your exact lens model, whether you already own the NiSi 180mm Filter Holder for Canon 11-24mm, and that your filters are 180mm square filters of 2mm thickness. The supplied information does not include step-by-step mounting instructions for these adapters, so if installation is unfamiliar, check the holder documentation rather than guessing.




