NiSi P1 Prosories Case: Organize Your Filters and Holder

Quick Answer

The NiSi P1 Prosories Case keeps your P1 filter holder and up to four filters protected in a hard shell. Use the steps below to pack everything snugly and avoid scratches or lost gear.

How to Pack the NiSi P1 Prosories Case

1. 1. Open the case and inspect the interior: Unzip the case fully and check that the elastic straps and dividers are positioned correctly. The case is designed to hold the P1 holder in the center slot and filters in the side sleeves. Don't force the holder into a filter slot — it won't fit and may damage the elastic.
2. 2. Insert the P1 holder first: Slide the P1 holder into the main compartment with the filter slots facing upward. The holder should sit flat and snug without pressing against the zipper. If the holder wobbles, adjust the foam padding underneath for a tighter fit.
3. 3. Place up to four filters into the side sleeves: Slide each filter into a separate elastic sleeve. Keep the glass facing away from the holder to avoid scratches. If you have fewer than four filters, leave empty sleeves empty — do not stack filters in one sleeve. Stacking two filters in one sleeve can cause scratches; always use one sleeve per filter.
4. 4. Close and secure the case: Zip the case closed slowly, making sure no straps or filter edges are caught in the zipper track. Store the case in a dry, padded compartment of your bag. A partially caught strap can leave the case unsealed, exposing your gear to dust and moisture.

Product Facts

• NiSi P1 Prosories Case for 4 Filters and Holder: Holds the P1 Holder and up to 4 filters in a hard outer shell. You can carry your entire mobile filter kit in one compact case without worrying about dust, drops, or scratches during travel.