Back to Blog
How-to Guides 2026-11-18 NiSi Filters Australia 0 views

NiSi Switch 100mm Filter Holder: How the Switch Works

NiSi Switch 100mm Filter Holder: How the Switch Works

Learn how the NiSi Switch 100mm Filter Holder rotates two filters together or independently, what it needs to mount, and how to set it up for graduated ND work.

What the Switch actually changes

The NiSi Switch 100mm Filter Holder is built for photographers who use graduated ND filters at different angles in the same frame. Instead of one rotating stage, it lets two slots rotate together or independently, so you can set one filter’s graduation where you need it and then adjust the other without disturbing the first.

That sounds like a small difference until you are working in complex light. A graduated ND placed for a bright sky often sits at a different angle than a second graduated filter used to hold back light on a reflective surface or a bright foreground. The Switch gives each filter its own rotation path while keeping both in the same holder.

The mechanism in plain terms

  • NiSi Switch 100mm Filter Holder: Allows two slots to be rotated together or independently from each other. This is the core feature: you can move both graduated filters as a pair or adjust one without moving the other.
    NiSi Switch 100mm Filter Holder
    NiSi Switch 100mm Filter Holder
  • NiSi Switch 100mm Filter Holder: Graduated ND filters can be positioned at different angles. That is the practical reason to choose the Switch over a standard single-rotation holder when your scene has more than one bright zone.
  • NiSi Switch 100mm Filter Holder: All slots can be rotated easily and smoothly. Smooth rotation helps you fine-tune a graduation line without jerking the holder or shifting the camera.
  • NiSi Switch 100mm Filter Holder: 360 degrees rotation and has a locking screw for the rear holder. The full rotation range lets you place a graduation at any angle, and the locking screw fixes the rear holder once you have it set.

Setting up the Switch on your lens

  1. Start with the 82mm adaptor ring: The Switch requires the NiSi 82mm adaptor ring for the 100mm system to mount to a lens. It is not included with the holder, so confirm you have that ring before you plan a shoot.
  2. Mount the adaptor ring to your lens: Thread the 82mm adaptor ring onto your lens. The supplied information does not include step-by-step mounting instructions beyond the requirement for this ring, so follow the instructions that come with your adaptor ring.
  3. Attach the Switch holder to the adaptor ring: Once the adaptor ring is on the lens, fit the Switch holder to it. The holder works with the 82mm main adapter included in the NiSi V7, V6, V5PRO, and V5 kits, so existing NiSi users can add the Switch as an additional holder.
  4. Insert your 100mm filters: The Switch is compatible with filters 100mm wide and 2mm thick. Slide your graduated ND filters into the slots; the holder does not include any filters.
  5. Rotate and lock the rear holder: Use the 360-degree rotation to set the rear holder’s angle, then tighten the locking screw to fix it in position. From there, rotate the front slot independently to place the second graduation.

How to use the two rotation paths

The Switch lets you choose whether the two slots move together or separately. For a simple scene where both graduated filters need the same angle, rotate them together as a pair. When the sky and the ground need different graduation angles, lock the rear holder and rotate only the front slot.

A practical approach is to set the filter that needs the most precise placement first, lock that stage, and then adjust the second filter. Because the slots rotate independently, you can refine one graduation without losing the other. The locking screw is for the rear holder, so the front slot remains free to rotate smoothly.

Vignetting and lens coverage

  • NiSi Switch 100mm Filter Holder: No vignetting at 16mm on a full-frame camera. If you shoot wide-angle landscapes, this is the key handling detail: the holder is designed to avoid vignetting even at 16mm.
  • NiSi Switch 100mm Filter Holder: Well suited for complex lighting situations. That matches the independent rotation feature: complex light often needs two graduated filters at different angles.

What to confirm before you order

The Switch is a holder only. It does not include filters, and it requires the NiSi 82mm adaptor ring for the 100mm system to mount to a lens. If you already own a V7, V6, V5PRO, or V5 kit, you can use the 82mm main adapter from that kit and add the Switch as an additional holder.

Check that your filters are 100mm wide and 2mm thick. The supplied information does not list other supported filter sizes or thicknesses, so treat those dimensions as the compatibility limit for this holder. If you are unsure whether your existing filters match, measure them before ordering.

Where the Switch earns its place

  • Two graduated ND filters at different angles: The independent rotation is the reason to choose this holder over a standard 100mm holder when one graduation line is not enough.
  • Wide-angle landscape work: The no-vignetting claim at 16mm on full-frame makes it a candidate for wide lenses, provided you use the required 82mm adaptor ring.
  • Existing NiSi 100mm kit owners: If you already have a V7, V6, V5PRO, or V5 kit, the Switch can be added as an extra holder using the 82mm main adapter from that kit.

Related Articles

Customer Service
Home
Products
Cart
Profile