NiSi Filters Australia

NiSi NC UV Filter II with 49mm Front Thread for Fujifilm X100/X100S/X100F/X100T/X100V/X100VI (Black)

New 49mm Front Filter Thread: The redesigned front ring accepts any standard 49mm filter, so you can add a polariser, ND or black mist without a separate adapter. Precision Made for the Fujifilm X100 Series: Fits the X100, X100S, X100F, X100T, X100V and X100VI, replacing the factory trim ring for a flush, fully integrated fit. Macro-Friendly Design: Engineered with dedicated clearance for extending lens barrels, so you can focus right to the lens’s minimum distance without restriction. Double-Sided Nano Coating, 99.3% Light Transmission: A low-reflection multi-nano coating on both glass surfaces holds flare and ghosting down while protecting contrast and colour accuracy. Oil and Water Resistant Surface: The hydrophobic top layer beads rain and resists fingerprints and grease, so a single wipe brings the glass back to clean. Everyday Protection for the Front Element: Shields the fixed 23mm lens from scratches, dust, sand and moisture, so the filter absorbs the damage instead of the lens

NiSi NC UV Filter II with 49mm Front Thread for Fujifilm - Main image
$49.39 $75.99 In stock

Category: NiSi Fujifilm X100 Filter System

The NiSi NC UV Filter II with 49mm Front Thread is a protective UV filter built specifically for the Fujifilm X100 series, from the original X100 through to the X100VI. It threads directly onto the camera in place of the factory trim ring, and its new 49mm front thread lets you mount standard screw-in filters on top, turning a simple protector into the foundation of a compact, genuinely useful filter system.

Designed Specifically for the Fujifilm X100 Series

Every X100 body shares the same fixed 23mm f/2 lens, and this filter is machined to match it exactly. Remove the decorative ring, thread the filter into its place, and the camera keeps the clean profile that makes the X100 such a pleasure to carry. Nothing protrudes, and nothing needs removing before it goes back in a bag.

A 49mm Front Thread That Opens Up the System

The headline change in this version is the 49mm thread cut into the front of the frame. Any standard 49mm filter now screws straight on, so a circular polariser, a neutral density filter or a black mist can join the stack without adapters, step rings or extra bulk hanging off the front of a compact camera.

Macro-Friendly Design

Designed with precision industrial measurement, this macro-friendly construction provides dedicated space for the lens barrel to extend in close-focus and macro shooting. The result is smooth, unrestricted lens travel with zero mechanical interference, so you retain 100% of your lens’s native close-focusing performance. Capture extreme close-up detail with total confidence. No binding, no limitations, and no compromise.

Double-Sided Nano Coating with 99.3% Light Transmission

Both faces of the optical glass carry a multi-layer low-reflection nano coating that passes 99.3% of incoming light. Reflections that would otherwise bounce between the filter and the lens are suppressed, which keeps flare and ghosting under control when you shoot into street lights, shop windows or a low sun. Colour rendition stays neutral, so files still grade the way you expect.

Everyday Protection for a Lens You Cannot Replace

The X100’s lens is fixed, so damage to the front element is not something you can solve by swapping in another piece of glass. This filter takes the scratches, dust, sand and spray that any camera collects in daily use, and replacing it costs a small fraction of a lens repair or a trade-in.

Oil and Water Resistant Coating

The outer surface adds a hydrophobic and oleophobic layer, so rain beads and rolls away instead of drying into spots, and fingerprints, sunscreen and sea spray lift off with a single pass of a microfibre cloth. It is a small detail, and it matters most on exactly the days you are out shooting.

Compatible with the Original Lens Cap

The original Fujifilm X100 Series lens cap still fits directly onto the filter, so there is no need to carry a substitute or leave the front of the camera exposed between shots. The filter fits into the way you already work rather than asking you to change anything about it.

One-Piece Design with No Adapter Required

Many protective solutions for the X100 need an adapter ring first, adding length, cost and one more component to lose. This filter is a single machined unit that threads directly onto the camera, so fitting it takes seconds and the finished result sits almost flush with the lens barrel. Fewer parts also means fewer surfaces for dust to settle between.

Finished in Black to Match Your Camera

The slim aluminium frame is anodised in black to sit alongside the black X100 bodies, and the same filter is offered in silver for the silver version of the camera. The low-profile edge keeps the camera’s silhouette intact and the engraving stays discreet rather than advertising itself.

Whether you are working the street with an X100VI, travelling light with an X100V, or keeping an original X100 in service, the NiSi NC UV Filter II with 49mm Front Thread delivers permanent protection, genuinely clean optics and, for the first time in this range, a front thread that lets a fixed-lens compact grow into a full filter system.

Check your selection

Confirm your chosen option and quantity before paying.

Delivery timing

Check the estimate before ordering for a particular date.

Standard Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

Express Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

View policy
Refund enquiries

Contact the store with the order number and item you are asking about.

Please contact us for the refund processing timeframe before returning an item.

View policy
Shipping charges

Review the charge for your selected delivery service.

Standard Shipping · United States: $0.00

Express Shipping · United States: $3.99

View policy
Planning a return

Contact the store before returning an item; the policy below applies.

United States · Return window (days after delivery): 30. Return method: By mail. Return postage: Seller pays.

View policy

Customer Reviews (5.0 / 5 · 5 reviews)

Jason J. ★★★★★

I was worried a filter might mess with the lens cap fitting, but this one clicks on perfectly. It's slim enough to keep the lens hood useable, and the coating seems to repel smudges well.

Miles ★★★★★

Finally, a UV filter that doesn’t block the viewfinder—the 49mm threading fits perfectly and the glass is crystal clear. I’ve been using it daily for street shots, and it hasn’t introduced any unwanted glare or color cast. It’s nice to have that extra scratch protection without sacrificing image qua

Samuel ★★★★★

It's slim enough that the original lens cap still fits, which was my main worry. The glass is crystal clear and seems to handle flare really well. I feel better knowing the lens is protected without sacrificing image quality.